| Description | '--Heavy-duty steel material, bearing up to 300lb
--The surface is frosted and painted, with high wear resistance
--The shaft of the hanging rod is 8.9 inches long and 2" in diameter, suitable for Olympic barbell plates
--Equipped with a rubber ring to avoid scratching the paint on the barbell
--It is very suitable for home gyms, we provide more barbell plates to meet the needs of use
--Bearing shaft diameter: 48mm; Bearing shaft length: 225mm | Hexagonal shed roof fabric 250D Oxford cloth PU2000 bracket 9.5MM fiber rod door frame size 180*180*180cm with two 9.5MM fiber rods with five wind ropes and eleven ground nails
Hexagonal shed roof fabric 250D Oxford cloth PU2000 bracket 9.5MM fiber rod door frame size 200*200*200cm with two 9.5MM red dimensional rods with five wind ropes and eleven ground nails | 1150gsm 100% polyester 350gsm pearl velvet washed back folding printed carpet XXY-Persia-A smile is alluring | Eaves size: 300x300cm Bottom size: 300x300cm Center height: 330cm | | Snow Melting Machine |
| Content |
Es una forma conveniente de almacenar tus pesas, no requiere piso adicional. Estos soportes para placas de peso son perfectos para gimnasio en casa, gimnasio de garaje y centro de entrenamiento comercial de alto trfico donde el espacio es limitado.
Soporte para placa de peso de pared Zantec
- Construccin de acero de calibre pesado
- El soporte para placa de peso est hecho de acero inoxidable slido con recubrimiento de polvo negro para evitar que el artculo se corroa, se oxida o se rompa.
- Estable y seguro
- Las mangas ligeramente inclinadas evitan que las placas se resbalen o incluso se caigan.
- Fcil de usar e instalacin rpida
- Se monta fcilmente en cualquier pared de hormign o madera. Todos los accesorios de montaje estn incluidos para una fcil instalacin.
ESPECIFICACIONES
- Color: Negro
- Material: Construccin de acero slido con recubrimiento de polvo negro
- Longitud de la manga: 9.1 in
- Dimetro de la manga: 1.9"
- Capacidad de peso: 300 libras por soporte
- Cantidad: 6 piezas (3 pares)
- Peso: 14 libras
Construccin de acero de calibre pesado
El soporte para placas de peso est hecho de acero inoxidable slido con recubrimiento en polvo negro para evitar que el artculo sea corrosivo, oxidado o roto y extender la edad del producto.
Ahorro de espacio
Este par de soportes para placas de peso es la alternativa perfecta para rboles de placas de peso voluminosos y que consumen espacio. Puede ayudarte a ahorrar ms espacio para entrenamientos manteniendo las placas de peso fuera del suelo fcilmente.
PIN DE CARGA DE 9"
Cuenta con un pasador de carga de 9 pulgadas con 1.9 pulgadas de dimetro, adecuado para placas de peso olmpico de 2 pulgadas. El pasador forma un ligero ngulo de inclinacin con la pared cuando se monta para un almacenamiento mejor y ms seguro.
ACCESORIOS COMPLETOS
Te proporcionamos accesorios de instalacin completos, no necesitas ir a la tienda local para comprar, incluyendo: 12 tornillos de madera para perno de madera y 12 pernos de expansin para hormign y 6 almohadillas de goma.
Capacidad de peso de 300 libras
Cada soporte para placas de peso tiene una capacidad de carga de aproximadamente 300 libras, puedes colgar tus discos de peso en l sin preocuparte por la deformacin del soporte de placas o que las placas de peso se caigan.
Almohadilla de goma gruesa
Una almohadilla de goma de 0.4 pulgadas de grosor en el extremo del pasador de carga protege las placas de arazos y daos innecesarios mientras las desliza en el soporte.
Specifications
| Brand |
|
| Material |
Alloy Steel |
| Item Weight |
13.8 Pounds |
| Number of Racks |
6 |
| Weight Limit |
300 Pounds |
| UPC |
196336402103 |
| Item Package Dimensions L x W x H |
11.81 x 9.84 x 7.87 inches |
| Package Weight |
13.8 Pounds |
| Item Dimensions LxWxH |
9 x 2.9 x 4 inches |
| Brand Name |
Zantec |
| Color |
6PCS |
| Part Number |
FQZSP_F68HXZC5 |
|
Specifications
| Brand |
Zantec |
| Material |
Oxford |
| Color |
White + Silver |
| Item Weight |
24.2 pounds |
| Recommended Uses For Product |
Picnic, Camping, Outdoor Activities |
| Product Dimensions |
64.17"L x 7.48"W x 8.27"H |
| Ultraviolet Light Protection |
Yes |
| Frame Material |
Metal |
| Water Resistance Level |
Not Water Resistant |
| Pole Material Type |
Alloy Steel |
| Assembly Required |
Yes |
|
Washable Area Rug for Living Room Bedroom Dinning Room
Specifications
| Brand |
Zantec |
| Size |
5x7ft |
| Material |
Polyester |
| Weave Type |
Knitted |
| Item Weight |
8.87 pounds |
| Pile Height |
Low Pile |
| Construction Type |
Machine Made |
| Back Material Type |
Thermoplastic Rubber (TPR) |
| Color |
Grey |
| Shape |
Rectangular |
| Product Dimensions |
15.75"L x 11.81"W |
| Model Name |
1lBQ0-wHFZdKDTOKr2nc0wwOZL22 |
| UPC |
199108494498 |
|    
Friendly Note:
While the canopy is designed to provide protection from UV rays and light rain, it is recommended not to leave the canopy set up in severe weather conditions, including strong winds, heavy rain, or storms, as this may cause damage.
Ensure to follow the easy setup process for optimal safety and stability. Always secure the canopy with the provided stakes and ropes to enhance wind resistance. |
Specifications
| Size |
18 x 34ft w/4*8ft Center Step |
| Color |
green |
| Brand |
Zantec |
| Product Dimensions |
216"L x 408"W |
| Style |
Custom |
| Model Name |
SP1834C |
| Special Feature |
Foldable |
| Shape |
Irregular |
| Closure Type |
Drawstring |
| Pattern |
Solid |
| Item Weight |
58.9 pounds |
|
Commercial Slushy Machine 15L, 3.96 Gals Margarita Machine, Food-Grade PC Tank & Stainless Steel, Frozen Drink Machine for Restaurant Bar Pool Parties
?
Stainless Steel + PC Material
Single 15 L Capacity Tank
400W Efficient and Energy-saving
Considerate Designs
Easy to operate
360?? Automatic Cleaning
Important Note:
To prevent the scratchs on the stainless steel body during transporation, we have covered it with a white films. If you don't like it5 then Please rip it off after you get if.
1.Sugar is essential when you use the drink machine and do not just use water during the procedure. The sugar content should not be less than 13% with sucrose and less than 22% with maltose. Meanwhile, after receiving the machine, you'd better use it 24 hours later.
2. When making the cocktail, alcohol cannot exceed 7 degrees.
Specifications
| Brand |
Zantec |
| Material |
Stainless Steel, Polycarbonate (PC) |
| Number of Bowls |
Single |
| Capacity |
15L / 3.96 US gallon |
| Voltage |
?AC 110~120V, 60Hz |
| Power |
400W |
| Cold Beverage Temperature |
-2??~-3?? (26.6-28.4?H) |
| Color |
?Black |
| Control |
Button |
| Refrigerant |
R290 |
| Product Dimensions |
?8.3 x 20.5 x 31.5 inch / 21 x 52 x 80 cm |
| Item Weight |
63.93 lbs / 29 kg |
| Package Content |
1 x 15L One Tank Commercial Slush Machine,1 x English Manual |
|
David Taylor –
I¡¯ve used similar products before, but these are better built. The powder-coated finish is scratch-resistant. The rubber tip is thick and soft, which is good for the plates. The mounting process was smooth. Definitely recommend for others.
George Martinez –
Very satisfied with the performance and durability. The plates stay put and don’t move around. The mounting hardware is high-quality. The black color looks sleek in my gym. A great buy for any fitness enthusiast.
Steven Jackson –
It does exactly what it says. Strong, simple, and efficient. The rubber padding is a nice touch. I had no trouble mounting it on my concrete wall. Good product overall and worth the investment.
Angela Moore –
This is one of the best purchases I’ve made for my home gym. The rack is strong and reliable. The rubber pads do a great job of protecting the paint on my plates. Easy to install and very useful. Five stars from me.
Nathan Scott –
Simple and functional design. The 300 lb capacity is reassuring. It took me less than an hour to install all six units. The rubber tips are a nice detail that adds protection. Would definitely buy again.
Mark Evans –
A great addition to my garage gym. It keeps everything neat and organized. The steel is thick and feels solid. I didn¡¯t expect the rubber pads to be this effective at preventing noise and damage. Solid buy.
John Doe –
Perfect for my small apartment gym. The wall-mounted design saves space. The hardware was included and worked well with my drywall anchors. I¡¯m happy with how it holds the plates securely without any issues.
Laura White –
Well-made and exactly what I expected. The rubber pad works as intended to protect the plates. The angle helps keep them from sliding out. It¡¯s a bit heavy, but it adds to the stability. Overall, a great purchase.
Megan Adams –
Good value for the money. The construction is robust and the finish looks professional. It¡¯s easy to mount on concrete or wood. The rubber coating prevents unnecessary wear and tear on the plates. Satisfied buyer.
Chloe Parker –
The build quality is impressive for the price. No complaints about durability yet. The rubber pads work well to prevent scratches. The installation instructions were clear and easy to follow. Happy customer here.
Patrick N. –
These are very practical for organizing weight plates. The 2-inch diameter fits Olympic plates perfectly. The slight tilt makes loading and unloading easier. I especially like the included mounting hardware¡ªit made things go smoothly.
Michelle R. –
Very pleased with the quality and ease of installation. The hardware came complete, which saved me time. It holds up to 300 lbs as advertised. The black finish blends well with my gym decor. A solid choice for serious lifters.
Jane Doe –
Solid construction and excellent value. The 6-pack gives you more flexibility for different walls. The rubber ends are thick enough to avoid any marks on the plates. Works perfectly with standard Olympic plates. Worth every penny.
Robert Johnson –
This wall-mounted weight plate holder is a game-changer for my home gym. It’s sturdy, easy to install, and holds up to 300 lbs per unit. The rubber pads protect my plates from scratches, and the angled design keeps everything secure. Perfect for saving space and keeping weights off the floor.
David Martinez –
I was skeptical at first, but after installing these, I’m impressed. They’re stable and can handle the weight without wobbling. The mounting hardware is high-quality. Great solution for a compact storage system in my workout room.
Elizabeth Young –
Exactly what I needed for storing Olympic plates on the wall. The angle prevents them from falling or slipping. It¡¯s a bit heavy but worth it for the sturdiness. Happy with the value and functionality.
Sarah Wilson –
Easy setup and strong build quality. The powder-coated finish looks good and feels durable. I appreciate the rubber lining to protect my plates. These hold securely even when fully loaded. Very satisfied with the purchase.
Sophie Green –
Great product for a small garage gym. The 6 pieces gave me plenty of options to hang all my plates. The rubber pad really helps prevent damage. I was impressed by how solid and well-made these are for the price.
Mia Bennett –
These racks are incredibly sturdy and well-designed. They save so much floor space in my home gym. The rubber padding is a nice touch for protecting equipment. Installation was straightforward with the provided tools. Highly recommend.
Jason Clark –
I love how this rack makes organizing my Olympic plates so much easier. It¡¯s built with heavy-duty steel and has a great finish that resists rust. The included hardware made installation a breeze. Definitely worth it for anyone with limited space.
Whit G –
The dumbbell plate rack is easy to assemble and very stable, though the paint layer is a bit thin!