| Description | Electric hammer is a type of electric drill | Large Self-priming Flower Pot CS-0X Series with Liquid Level Detector | Large Self-priming Flower Pot CS-0X Series with Liquid Level Detector | 1150gsm 100% polyester 350gsm pearl velvet washed back folding printed carpet XXY-Persia-A smile is alluring | 100% polyester, washable and foldable | Folding awning-center lock (factory patent) |
| Content |
Taladro de martillo rotativo de servicio pesado SDS-Max de 1-9/16"
Mango ajustable de 360
El mango de goma ajustable de 360 est diseado para mejorar tu comodidad y proporcionar facilidad de uso. Le permite completar fcilmente su trabajo con una mayor maniobrabilidad. Especialmente til en espacios reducidos o estrechos, proporcionando precisin y precisin al tiempo que reduce la fatiga durante el trabajo prolongado.
6 velocidades ajustables
Taladro de martillo de 1600 W para hormign cuenta con 6 engranajes de velocidad diferentes para satisfacer tus necesidades especficas. Con el sistema de control de velocidad, puede ajustar fcilmente la velocidad de acuerdo con los requisitos de su proyecto. Esto permite una mayor versatilidad y precisin en diversas tareas de perforacin.
Impacto de alta eficiencia
Cuenta con un cilindro de precisin de gran dimetro, que ofrece una potente fuerza de impacto para una mayor eficiencia del trabajo. La alta fuerza de impacto garantiza una perforacin rpida y eficaz. Adems, se incorpora un embrague de seguridad para proteger sus manos y proporcionar mayor seguridad durante el funcionamiento.
Control de vibracin mejorado
El embrague de seguridad, junto con el sistema de absorcin de impactos mejorado, garantiza medidas de seguridad adicionales y reduce la vibraci??n para una experiencia de trabajo ms cmoda.
Proteccin del motor y sistema de refrigeracin eficiente
Diseado con una estructura completa de proteccin del motor, evitando eficazmente que el polvo entre en el motor durante el trabajo, lo que podr??a afectar el rendimiento del motor. Adems, el sistema de enfriamiento eficiente se implementa para enfriar eficazmente el motor, lo que resulta en una mayor longevidad y durabilidad de la m??quina.
Portabrocas sin llave SDS-Max
El mandril sin llave SDS-max garantiza un control preciso y una transferencia de energa mxima de impacto, lo que permite una perforacin precisa y eficaz. Con este innovador sistema, ya no necesita herramientas adicionales para cambiar bits entre trabajos, ahorrndole tiempo y esfuerzo.
Specifications
| Brand |
|
| Power Source |
Corded Electric |
| Maximum Rotational Speed |
10 rad/sec |
| Voltage |
120 Volts |
| Amperage |
13 Amps |
| Maximum Chuck Size |
13 Amps |
| Color |
Black |
| Included Components |
Hammer Drill |
| Product Dimensions |
19"L x 15.7"W x 5.9"H |
| Number of Speeds |
6 |
| Speed |
60 Hz |
| Maximum Power |
1600 Watts |
| UPC |
196336751386 |
| Part Number |
Heavy Duty Rotary Hammer Drill |
| Item Weight |
25.1 pounds |
| Item Package Quantity |
1 |
| Batteries Required? |
No |
|    
|
  
Specifications
| Material |
Plastic |
| Color |
Black |
| Special Feature |
Weather Resistant, Self Watering |
| Style |
Modern |
| Shape |
Round |
| Indoor/Outdoor Usage |
Outdoor, Indoor |
| Mounting Type |
Floor Standing |
| Product Dimensions |
26.57"D x 13.78"W x 22.24"H |
| Brand |
Zantec |
| Item Weight |
12.46 pounds |
| UPC |
198723914176 |
| Size |
21 Inch |
|
Washable Area Rug for Living Room Bedroom Dinning Room
Specifications
| Brand |
Zantec |
| Size |
5x7ft |
| Material |
Polyester |
| Weave Type |
Knitted |
| Item Weight |
8.87 pounds |
| Pile Height |
Low Pile |
| Construction Type |
Machine Made |
| Back Material Type |
Thermoplastic Rubber (TPR) |
| Color |
Grey |
| Shape |
Rectangular |
| Product Dimensions |
15.75"L x 11.81"W |
| Model Name |
1lBQ0-wHFZdKDTOKr2nc0wwOZL22 |
| UPC |
199108494498 |
|
Washable Rug Can Help You Better Deal with Kids, Pets and Everyday Messes??Kid and Pet Friendly.Lay a rug on a hardwood floor and you instantly increase the warmth and comfort of a room. Add a rug next to a bed and you've given yourself a layer of cushion and softness to step on first thing in the morning. Place a rug over your floors during colder months to help warm up the whole house.
Soft Faux Wool Surface
The stunning modern area rugs has a high pile height to fit effortlessly beneath furniture, is soft to the touch, and can withstand high traffic areas of your home.
Non-slip TPR Backing
This indoor accent rug is designed with a non-slip TPR backing, which can firmly grasp the ground without worrying about slipping.
Exquisite Edge Process
Our washable rugs use a high-density serging edge, sturdy and durable construction can make area rugs last for years.
Low Pile Floor Carpet
Suits for high traffic areas like living room, hallway, kitchen. Dust and debris can be easily removed with a low-power vacuum cleaner.
Regular vacuuming is the most effective way to keep rug clean.Deep clean the rug with warm water (no bleach or fabric softener) to remove dirt.Machine wash with cold water on gentle cycle(Do not use bleach). Line dry or dry on low heat, Do not use an iron.
--For sizes 2'x6', ??5'x7': Machine wash cold in front-load washer only.
--For sizes 8'x10' , 9'x12' and 10'x13': Machine wash cold in commercial-laundromat size front-load washer only.
Avoid direct sunlight which will cause the colors in your area rug to fade over time.
-Application: Living room/Bedroom/Dining room/Runner/Entryway/Kids /Playroom/Home office/Kitchen/Farmhouse/Floor/Hallway/Laundry
Specifications
| Brand |
Zantec |
| Size |
9'x12' |
| Material |
Faux Wool |
| Weave Type |
Machine Made |
| Item Weight |
28.3 pounds |
| Pile Height |
Low Pile |
| Construction Type |
Machine Made |
| Back Material Type |
Thermoplastic Rubber (TPR) |
| Color |
Geometric|red |
| Indoor/Outdoor Usage |
Indoor |
| Is Stain Resistant |
Yes |
| Product Care Instructions |
Bring the rug outside whack the back of it to get more dirt out, Vacuum the front and back of the rug (low-power setting), Machine Wash(Please operate step1 and step2 before machine wash.), Avoid continuous exposure to sunlight. |
| Pattern |
Geometric |
| Shape |
Rectangular |
| Special Feature |
Non Slip, Washable |
| Room Type |
Multiple |
| Product Dimensions |
144"L x 108"W |
| Rug Form Type |
Area Rug |
| Water Resistance Level |
Water Resistant |
| Model Name |
OchXOn7mybDjuWMZD8XXZg2B |
| UPC |
198723049311 |
|   
|
mohammad haroon –
It was a great Hammer drill, The Product was in a very sturdy case and seemed to be made very well. I ordered it on accident but have to admit I almost didn¡¯t want to send it back it was a well-made tool that worked flawlessly.
Jason Andre –
This tool is very useful for ripping up ceramic tile or breaking up a cracked walkway. I also used this to drill several holes in the wall of the house. It was bigger and more powerful but more expensive and heavy to use. Worked great.
Althea –
This drill/hammer is a beast. I don¡¯t regret the purchase. It delivered great results. Worth the cost. The product is heavy-duty, excellent quality, and even more amazing is that it works!
elcz28 –
Cant really say much about how long it will last but it busts right through concrete and seems to drill through some of the hardest rock ive ever needed to drill through. had a tough time chipping through that rock but went through all the other rocks very well.like i said that one rock was the hardest ive ever came across.this drill is pretty heavy but i think that kind of helps control it.jack hammer,rotory hammer and chipping gun for a little over $100.00,its worth it even if it only lasted one job.
Cary –
Works just as well as the expensive name-brand units. Good quality tool. And quite powerful.
TDV –
Having used multiple types of hammer drills for masonry and demolition work, I have some experience with different models and levels of performance. This is a basic budget quality tool that lacks the bells and whistles and reliability of a unit that is ¡°name brand.¡± If you¡¯re expecting that level of quality and want to use this tool daily or for extended periods, don¡¯t purchase this drill. It won’t meet those expectations and you’ll end up returning it. However, if you¡¯re looking for something that will operate on occasion and don¡¯t want to break the bank, this is a good option. It¡¯s good for occasional use on home projects and I think it performs well given its price point. You can definitely tell that it has some cheap components on it and many of the plastic toggles feel like you need to be delicate with them or you risk breakage. If this was listed for a higher price point, it’d be three star. But for a homeowner with limited applications, this is a good option at a price that does beat out what I could find shopping around my local hardware stores.
Oleran –
I got this because I need a hammer drill of smaller format than my bulldog SDS drill.This one seems ok.It definitely draws power. The lights on the same circuit dimmed noticeably (that brief dimming on initial startup) more than usual when I used it.The ergonomics are fine and totally comparable to other brand name 1/2″ drills. It comes with an ok auxiliary handle that has positive position locks that mate with positioning “dogs” on the drill body.The chuck operates smoothly and seems of good quality with no “eyeball” noticeable runout after a brief run in.The controls are easily spotted (orange) and follow a layout common to power drills.It comes with an assortment of common bit sizes that include a few masonry and metal bits, a depth guide, aux handle and a chuck key. There is a key retainer on the handle butt.On 1st startup, the rotation seemed a bit rough, but smoothed out after a few seconds. Maybe it needs to “wear in” a bit. The variable speed trigger works well and a range dial is included on the trigger.I couldn’t get the trigger lock to work in any mode, or any speed. It would engage, but allowed the RPM to slow to just a couple of revolutions/minute.It will be fine for my uses.
STEPHEN C MACDONALD –
This review is for 7-Amp (850W) Hammer Drill, $50 on Garvee.This electric plug-in drill has a ?¡± Jacob¡¯s keyed chuck (not keyless). I actually prefer a Jacob¡¯s chuck in those high-torque applications, like masonry drilling, where I want to really sock down the chuck for a firm grip.As is typical of larger high torque drills it comes with an auxiliary handle for two hand grip.If I compare this against my Craftsman hammer drill it has greater amperage rating of 7 amps versus 6 amps for my Craftsman.It comes with a 10 bit pack of combination HSS split tip and Carbide tipped bits for Masonry/tile drilling.As with all hammer drills there is a slide switch to change from standard drilling to hammer drilling. Note: If you are new to hammer drilling you need to know that you will not experience the hammer effect until the bit is pressed down against the object to be drilled, i.e., you will not hear any hammer noise if you just press the trigger without first pressing down on the bit.Checked the drill out with one of its 1/4¡± masonry (carbide tipped) bits. Chewed though a concrete block like proverbial butter.
Kesha B –
I consider myself a handy woman, I use this hammer drill to put up some shelves .. one of the first thing I noticed ,was this awful burning smell. I¡¯m not sure if the smell is due to the power tools/drill breaking them self in or some other matters ¡So far, so good, the smell seem to burn away, as I got further into my project.. My only concern is I wish the hammer drill had a rubber grip handle¡. Because the handle on this Drill is just a hard, plastic. with a hard plastic design, that I felt the entire time in my hand. So I had to use gloves , so that I wouldn¡¯t create any calluses in the palms of my hands¡ over all, this hammer drill with drill, bits, seem to have worked just fine for me , the drill is heavy duty with a nice length extension cord¡
The scientist –
I very much like this hammer drill. All aspects met or exceeded my expectations/assumptions. To be specific, I didn’t expect much from the depth guage. But it does work. It is plastic, but it stays put. The drill itself, was very good. The hammer action was more intense than I expected, in a good way. No vibration on your hands, but very impactful performance. The chuck key is located on the base of the handle. This might be my favorite part because I hate loosing the chuck keys. Also suprizingly, the concrete bits it came with were really tough. Please see my short video plowing through a piece of granite in the back yard. (I was looking for the hardest material I knew of to test it on) zero issues. It’s tools like this, where you definitely don’t need to buy name brand. This is a win for me.
Prof CAH –
With all the cordless drill options out there, sometimes you just need the power of a corded drill. I picked this up because I needed just that, and I needed a hammer drill to be able to drill into brick and stone easily. This drill with its hammer function allows me to punch through brick easily. Being corded it has plenty of power for this, or for mixing grout, paint, and the like, another reason I picked this up. The drill itself is very heavy, and very nose-heavy; it comes with an auxiliary handle that is a must use in my opinion. The drill body is some kind of resin/plastic, very tough and dense and looks like it will be very durable. Having a 1/2¡± chuck on this is also a plus as I do use a bit that large occasionally. As far as power goes, this drill has plenty, and the hammer function works very well.This drill so comes with five masonry bits and 5 HSS (I believe) drill bits; these are good stop-gaps. It is a good budget drill option, definitely not a pro- or prosumer-level drill, but one that will serve my purposes nicely. It is fairly priced and a good corded drill to have on hand.
Tami –
This gets the job done . Although the drill bit and the way you change it out isn¡¯t as fast as the upgraded ones these days and it could be a b** if you need to constantly change it out and tighten it with the key that came with this¡ª- it still gets the job done .
Darren Beavers –
Cool
Julian –
I love the fact that this drill is corded. No worrying about battery life or recharging in the middle of a job. The 120V power delivers consistent strength, and the overall design feels professional and reliable. A must-have for any serious DIYer or tradesperson.
Kieran –
Very solid build and excellent performance. The vibration control is much better than other hammers I’ve used, which makes it easier to work for extended periods. The included chisel is sturdy and works great for breaking up tiles or small slabs.
Harold –
Great purchase for anyone doing serious demolition or construction. The 13-amp motor is powerful enough for most jobs, and the SDS-Max chuck makes bit changes fast and easy. I especially like the 6-speed control¡ªit gives you more flexibility depending on the material you’re working with.
Charlotte Thompson –
I was impressed by how quickly this drill breaks through hard surfaces. The precision cylinder and high impact force make all the difference. Even after several hours of continuous use, it didn¡¯t overheat thanks to the efficient cooling system.
Karrie Mills –
The 1-9/16″ capacity was perfect for my project. I used it to drill anchor holes into a concrete wall, and the speed settings allowed me to adjust as needed. The motor protection and dust resistance are well designed, which is crucial when working in messy environments.
Tammy Huenefeld –
This 1600W SDS-Max hammer drill is a powerhouse for concrete work. It handles tough demolition tasks with ease and has a comfortable 360¡ã adjustable handle. The 6-speed settings give me full control, and the vibration reduction system makes it less tiring during long use. Highly recommend for heavy-duty jobs.
Bryneeah –
I needed to break up some old pavement, and this drill made quick work of it. The impact efficiency is impressive, and the portability in the carrying case is a big plus. I also appreciate the safety clutch and cooling system that keeps it running smoothly under pressure.
Amber –
As a construction worker, I rely on tools that can last through the day. This Zantec hammer drill has done just that¡ªhandling everything from chipping to drilling without missing a beat. The included bit and chisel are decent quality and ready to use right out of the box.
Dwayne L. –
This tool is built for real work. The adjustable grip really helps when maneuvering in tight spaces, and the power is nothing short of amazing. I¡¯ve used cheaper hammers before, but none have matched the performance or durability of this one.
Isabelle –
The 6-speed control is fantastic. I was able to fine-tune the speed for different materials, which saved me time and effort. The tool feels solid and well-built, and the carrying case adds extra convenience. Great investment for anyone involved in construction or renovation.
Lila –
This is a no-nonsense tool that gets the job done. I used it for a weekend project to remove a concrete post, and it handled the task efficiently. The included chisel is useful for scoring lines before breaking. Overall, a solid and dependable piece of equipment.
Elaine Carter –
I¡¯m really impressed by the build quality and performance of this drill. The SDS-Max chuck is secure and allows for quick bit changes. The vibration reduction system is effective, and the motor remains cool even during intense use. I¡¯d definitely buy another if needed.
Genevieve –
The motor protection and dust-proof features are top-notch. I worked in a dusty garage and didn¡¯t have to worry about damaging the internal components. The hammer function is precise and efficient, and the overall finish looks professional. Definitely a tool I¡¯ll keep for years.
Dominic –
I¡¯ve used many drills over the years, but this one stands out. The power-to-weight ratio is impressive, and the balance makes it easier to handle. The 360¡ã handle is a nice touch for comfort. I highly recommend it if you¡¯re looking for a reliable and powerful tool.
Benjamin –
It¡¯s a bit loud and heavy, but the performance is unmatched. I used it to break up an old concrete driveway, and it finished the job in half the time I expected. The chisel attachment is versatile and works well for both chipping and light demolition.
Felix –
The adjustable handle is a game-changer. It fits comfortably in your hand and rotates easily, making it ideal for awkward angles. The hammer action is smooth and strong, and I never had issues with it slipping or losing power mid-task.
Amelia –
After using this for a week straight, I can say it¡¯s one of the best demo hammers I¡¯ve owned. It¡¯s loud, yes, but that¡¯s expected for a tool of this caliber. The carrying case is sturdy and protects the bits and accessories well. Good value for the price.
johntuc –
This hammer drill is perfect for home improvement projects. I used it to install shelves in a concrete wall, and the process was surprisingly fast and clean. The bit change mechanism is intuitive, and the machine stays cool even after prolonged use.
Clara –
The 1600W motor is extremely powerful. I used it to chip away at a concrete floor, and it handled it effortlessly. The only downside is the weight¡ªit’s a bit heavy for extended handheld use¡ªbut it’s still worth it for the kind of work it does.
Eliana –
I’m not a professional, but I needed something reliable for occasional heavy-duty work. This drill exceeded my expectations. It’s durable, powerful, and user-friendly. The six-speed feature lets me match the tool to the task, which is very helpful for someone like me who doesn’t do this every day.